Today we are going to talk about how to implement VitalPBX in Raspberry Pi 3 B +, guiding them step by step throughout the installation process.
For less than US $ 80.00 you can have VitalPBX with all its functions and with great capacity in a Raspberry Pi 3 B +
Next, I will follow them:
1.- Buy a Raspberry Kit that meets our requirements, we recommend Amazon. We perform the Test with the Kit shown in the following image:
2.- Download the image of Centos 7 for Raspberry PI, in Google write “Centos 7 Raspberry PI download”. The correct image is the one that says “CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-XXXX-sda.raw.xz”.
Actual Download Link:
Then unzip the file, and we will have a resulting .raw file, which we will flash in our SD with the Echer program.
Note: If we had any problem recognizing the partitions of our SD because we had already used it, we must delete the partitions manually with Windows Disk Management.
3.- Now we introduce the SD card in the slot and turn on the Raspberry, which will start to install and maybe restart several times.
Once the installation is complete, the credentials to enter are the following:
4.- Automatically resize your / partition, just type the following (as root user):
[root@localhost ~]# /usr/bin/rootfs-expand
[root@localhost ~]#vi /etc/modprobe.d/raspi-blklst.conf
#wifi blacklist brcmfmac blacklist brcmutil #bt blacklist btbcm blacklist hci_uart
6.- In this step we will proceed to install VitalPBX with the following commands:
[root@localhost ~]# yum install wget -y
[root@localhost ~]# wget https://raw.githubusercontent.com/VitalPBX/raspberry/master/install.sh
[root@localhost ~]# chmod +x install.sh
[root@localhost ~]# ./install.sh